- 9 -
To Set the “HOLD” function or Rest the “Set HOLD” function
Under F21-02 setting, give the Check weighing start signal by pressing this key.
Under TARE Setting condition, can select “Gross weight” or “Net Weight”
display mode.
First input : Gross Weight will be displayed.
Second input : Net Weight will be displayed.
You can set each weighing process as a certain P/N.
Each weighing process will be saved with FINAL, PRE1, PRE2, and Free Fall
set value.(Max. 50 kinds of P/N you can set)
And you can call certain P/N with each set value.
Check the “Accumulated weight” and “Count” for current Part No. or All Part
No.s
Sub Total : F15-00 setting
Grand Total : F15-01 setting
Set the “Over” range of current Part No.’s Check weighing limit.
Set the “Under” range of current Part No.’s Check weighing limit.
1. Manual Print (F38-00 setting, under F35-01)
2. Manual weighing Data save for accumulated weighing count and weight.
(F01-00 / 02 setting)
3. Calibration mode
- Digit setting
Whenever pressing “0”key, digit will be change 1, 2, 5, 10, and 50.
- Decimal point position
Whenever pressing “0”key, decimal point will be change.
