SEW-Eurodrive MOVI-C UHX65A-M Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 60

SEW-Eurodrive MOVI-C UHX65A-M Скачать руководство пользователя страница 8

1

General information

Decimal separator in numerical values

Manual – MOVI-C

®

CONTROLLER progressive UHX65A-M

8

1.4.3

Structure of embedded safety notes

Embedded safety notes are directly integrated into the instructions just before the de-
scription of the dangerous action.

This is the formal structure of an embedded safety note:

SIGNAL WORD!

Type and source of hazard. Possible consequence(s) if disre-

garded. Measure(s) to prevent the hazard.

1.5

Decimal separator in numerical values

In this document, a period is used to indicate the decimal separator.

Example: 30.5 kg

1.6

Rights to claim under limited warranty

Read the information in this documentation. This is essential for fault-free operation
and fulfillment of any rights to claim under limited warranty. Read the documentation
before you start working with the product.

1.7

Product names and trademarks

The brands and product names in this documentation are trademarks or registered
trademarks of their respective titleholders.

1.7.1

Trademark of Beckhoff Automation GmbH

EtherCAT

®

is a registered trademark and patented technology, licensed by Beckhoff

Automation GmbH, Germany.

1.7.2

Trademarks of ODVA, Inc.

EtherNet/IP™, CIP™, ODVA

®

, and ODVA CONFORMANT

®

are registered trademarks

of ODVA, Inc.

1.8

Copyright notice

© 2022 SEW‑EURODRIVE. All rights reserved. Unauthorized reproduction, modifica-
tion, distribution or any other use of the whole or any part of this documentation is
strictly prohibited.

26881144/EN – 02/2022

«
...
6
7
8
9
10
...
»

Содержание MOVI-C UHX65A-M





























































Отзывы:

Нет отзывов