SEW-Eurodrive MOVI-C UHX65A-M Скачать руководство пользователя страница 40

Страница: 40 / 60

Operating behavior on EtherNet/IP™

Bus-specific LEDs for EtherNet/IP™

Manual – MOVI-C

CONTROLLER progressive UHX65A-M

10.3

Bus-specific LEDs for EtherNet/IP™

The following table shows an overview of the bus-specific LEDs of the UHX65A-M
controller.

Controller

Status LED

MOVI‑C

CONTROLLER

progressive UHX65A‑M

L/A

L40 (corresponds to status LED "MS")

L41 (corresponds to status LED "NS")

10.3.1

Status LEDs "L/A" (Link/Activity)

Indicate the status of the Ethernet connection.

Status LED

Meaning

Green

There is an Ethernet connection.

EtherCAT

/SBus

PLUS

interface:

Green, flashing

Data is currently being exchanged via Ether-
net.

Engineering interface and fieldbus
interface: Orange, flashing

Data is currently being exchanged via Ether-
net.

Off

There is no Ethernet connection.

10.3.2

Status LED "L40" – EtherNet/IP

(MODULE STATUS)

Status LED

Operating status

Green

The controller is in normal operating state.

Green, flashing

The controller has not been configured yet and is in "Standby"
state.

Green/red, flashing

The controller performs a LED test.

Red, flashing

Conflict detected in the assigned IP address. Another station
in the network uses the same IP address.

Red

Controller fault.

Off

The controller is either not supplied with voltage, or is defec-
tive.

26881144/EN – 02/2022

Содержание MOVI-C UHX65A-M





























































Результаты поиска

Содержание MOVI-C UHX65A-M

Отзывы:

SEW-Eurodrive MOVI-C UHX65A-M, Руководство пользователя, Страница: 40 / 60

Результаты поиска

Содержание MOVI-C UHX65A-M

Отзывы: