manualshive.com logo in svg

SEW-Eurodrive MFC1/FHX Series, Руководство по эксплуатации, Страница: 26 / 164

Поделиться
Скачать
SEW-Eurodrive MFC1/FHX Series Скачать руководство пользователя страница 26

4

Mechanical installation

Installation notes

Operating Instructions – MOVI-C

®

 FIELD CONTROLLER standard/advanced

26

4

Mechanical installation

4.1

Installation notes

INFORMATION

Adhere to the safety notes during installation.

 WARNING

Improper installation/disassembly of the device and mount-on components.
Serious injuries.
• Adhere to the notes about installation and disassembly.

4.2

Required tools and resources

• Set of wrenches, set of screwdrivers, set of socket wrenches
• Torque wrench
• Compensation elements (washers and spacing rings), if necessary
• Standard parts are not included in the delivery

4.3

Tolerances for torque ratings

The specified torques must be adhered to with a tolerance of +/- 10%.

4.4

Installation requirements

Check that the following conditions have been met:
• The information on the nameplate of the device corresponds to the line voltage.
• The device is undamaged (no damage caused by transport or storage).
• The  ambient  temperature  corresponds  to  the  operating  instructions  and  name-

plate.

• The device must not be installed in the following ambient conditions:

– Potentially explosive atmosphere
– Oils
– Acids
– Gases
– Vapors
– Radiation

• For special designs: The device is designed in accordance with the actual ambient

conditions.

26872137/EN – 12/2021

Содержание MFC1/FHX Series





































































































































































Отзывы:

Нет отзывов