SEW-Eurodrive MFC1/FHX Series Скачать руководство пользователя страница 125

Страница: 125 / 164

Service

Device replacement in MOVISUITE®

Operating Instructions – MOVI-C

FIELD CONTROLLER standard/advanced

125

8.6.3

Logging function

The MOVI-C

FIELD CONTROLLER has a logging function, for example, to track the

processing procedures in the event of an error. The logging function is disabled by de-

fault.

INFORMATION

To keep the write operations on the memory card low and in this way prevent a de-

fect, the logging function should not be activated permanently.

To activate the logging function, do the following:
1. On your engineering PC connected to the MOVI-C

FIELD CONTROLLER, open

the OMH memory card content using a file explorer.

2. Navigate to the "log" directory on the OMH memory card.

The "log" directory contains the

LogConfig.Example.xml

file.

3. Rename the

LogConfig.Example.xml

file into

LogConfig.xml

The logging function is now active.

26872137/EN – 12/2021

Содержание MFC1/FHX Series





































































































































































Результаты поиска

Содержание MFC1/FHX Series

Отзывы:

SEW-Eurodrive MFC1/FHX Series, Руководство по эксплуатации, Страница: 125 / 164

Результаты поиска

Содержание MFC1/FHX Series

Отзывы: