manualshive.com logo in svg

SEW-Eurodrive MFC1/FHX Series, Руководство по эксплуатации, Страница: 118 / 164

Поделиться
Скачать
SEW-Eurodrive MFC1/FHX Series Скачать руководство пользователя страница 118

8

Service

Fault/error table

Operating Instructions – MOVI-C

®

 FIELD CONTROLLER standard/advanced

118

Subfault: 150.2

Description: Restart after exception handling

Response: No response

Cause

Measure

The MOVI-C

®

 CONTROLLER performed an ex-

ception handling followed by a restart. This can

be caused by impermissible memory access, for

example.

During exception handling, the

MOVI-C

®

 CONTROLLER stored a log file in the

file system with further details on the exception.

You can use the log file to eliminate the fault or

use the information of the log file when contacting

SEW‑EURODRIVE

 Service.

Acknowledging the fault will restart the

MOVI-C

®

 CONTROLLER.

Subfault: 150.3

Description: Faulty booting

Response: No response

Cause

Measure

Failed to start the MOVI-C

®

 CONTROLLER pro-

perly. The configuration of the

MOVI-C

®

 CONTROLLER firmware might be

wrong or corrupt.

Check the log files for new entries with the sever-

ity "fault" or "exception" for further information. It

might be necessary to activate the storage area

of the log files in the file system of the

MOVI-C

®

 CONTROLLER. Acknowledging the

fault will restart the MOVI-C

®

 CONTROLLER. If

the problem is still present, contact

SEW‑EURODRIVE

 Service.

Subfault: 150.4

Description: Fault in early booting phase

Response: No response

Cause

Measure

Failed to start the MOVI-C

®

 CONTROLLER pro-

perly in the early booting phase due to faults.

Check the log files for new entries with the sever-

ity "fault" or "exception" for further information. It

might be necessary to activate the storage area

of the log files in the file system of the

MOVI-C

®

 CONTROLLER. If the software pack-

ages are corrupt, load original 

SEW‑EURODRIVE

software packages onto the removable storage

device again. Acknowledging the fault will restart

the MOVI-C

®

 CONTROLLER. If the problem is

still present, contact 

SEW‑EURODRIVE

 Service.

8.4.2

Fault 151 controller firmware – License Manager fault

Subfault: 151.1

Description: License Manager not working properly

Response: No response

Cause

Measure

Internal software error

Contact 

SEW‑EURODRIVE

 Service.

26872137/EN – 12/2021

Содержание MFC1/FHX Series





































































































































































Отзывы:

Нет отзывов