37
E
NTERING
W
IRING
I
NFORMATION FOR AN
E
LEMENT
Begin setup by entering an amount of time (1-60 minutes) into the
Demand Window
and selecting a
Line Frequency
from the drop-down list.
Use the following steps:
1)
Select
WYE
or
DELTA
as the wiring connection.
A
WYE
connection automatically displays all three CTs. Any changes made to CT1 also apply to
CT2 and CT3.
Wye Wiring Connection
A
DELTA
connection displays only the two available CTs. Any changes made to CT1 also apply to
CT3.
Delta Wiring Connection
2)
Depending on the wiring connection, make changes to CT1, CT2, and/or CT3.
*CT Phase—Select which phase to monitor
CT Type—Use the drop-down list to select the type of CT attached to the Power Patrol.
*CT Amps—Enter the amperage rating.
*CT Phase Shift—Enter in degrees the phase shift of the CT. The default is 1.1.
*Apply to MilliVolt CT not Rogowski Coils
