Setra Systems 140CP, Руководство пользователя

Страница: 27 / 56

27
Appendix II
Setup Functions
PRINT FORMAT
The print format function controls the printout of various measured and stored
numbers. To format which functions are to be printed, use the following procedure:
1. Press the
—
key and enter
1111
.
2. Press the setup/cal key. The display will read "CAL Pr."
3. Enter 0 if your scale is connected to a Setra Auto Count 200 (version 2.05 or
lower).
Enter 1 if your scale is connected to a Model 240P Printer.
Enter 2 if your scale is connected to a Model 340P Sprocket Feed Label Printer.
Enter 3 if your scale is connected to a Setra Auto Count 200 (version 2.06 or
higher). The scale will return to the normal weighing mode and the print mode
may be accessed by pressing the
print key.
4. Press the
setup/cal
key, the scale now asks if you wish to print the tare weight.
5. Enter 1 if you wish to print the tare weight (enter 0 if you do not).
6. Press the setup/cal key.
7. Read the display. The scale now asks if you wish to print the gross weight.
8. Enter 1 if you wish to print the gross weight (enter 0 if you do not).
9. Press the
setup/cal
key.
10. Read the display. The scale now asks if you wish to print the APW function.
11. Enter 1 if you wish to print the APW function (enter 0 if you do not).
12. Press the setup/cal key.
13. The scale now asks if you wish to print the accumulated weight (or count).
14. Enter
1
if you wish to print the accum function (enter
0
if you do not). Generally,
it is good practice not to select accum unless data will be entered into this
register during normal use.
15. Press the setup/cal key.