Setra Systems 140CP, Руководство пользователя

Страница: 20 / 56

20
minimum weight necessary has been placed on the scale, it will instruct you to
add the necessary number of pieces to the pan. To count, continue by following
Steps 6-8.
6. Add the exact number of pieces requested by the scale.
7. Press the count key. The scale will display the number of pieces equal to the
number necessary to meet the minimum accuracy required.
8. Add pieces to continue counting.
9. Wait for the "ok" symbol, then read the display. The scale now reads the total
number of pieces on the pan.
ACCUMULATING RESULTS
It is often necessary to accumulate weights or counts of various batches; e.g., the
number of capacitors counted out during a day, or the total weight of widgets
weighed out during a day. The scale can be used to accumulate both weights and
counts simultaneously. Before accumulating, press the
— , clear keys to clear out all
memory registers. To accumulate a weight, use the following procedure:
1. Press the zero key.
2. Place the object to be weighed on the pan.
3. Press the accum key. The scale displays the total contents of the accumulator.
4. Press the clear key.
5. Repeat Steps 1-3 to accumulate the weights of further batches.
6. Press the ./rcl key.
7. Press the accum key. The scale now reads the accumulated weight.
Note: Whenever the scale is in the weighing mode, the accumulated weight may be
recalled by pressing the keys
./rcl , accum .
To accumulate a count (or reverse count, if kitting), use the following procedure:
1. Press the zero key.
2. Place a known number of pieces on the pan.
3. Enter the number of pieces on the pan.
4. Press the count key.
5. Add (or subtract if kitting) the desired number of pieces.