Servomex Servotough SpectraScan 2400, Руководство пользователя

Страница: 52 / 76

SERVOTOUGH SpectraScan User Manual
02400001A/1 50
7.0 Sample Line Connections
7.0.1 Sampling Ports
Both sample intake and exhaust ports are fitted with male ¼” Swagelok® compression tube fittings.
Only properly mated, female ¼” Swagelok® compression fittings should be used on the sample
intake and exhaust lines.
CAUTION
Equipment Damage: Restricting the gas flow on either the intake or the exhaust side may cause
the gas cell to over pressurize, causing damage to the analyzer. Care should be taken to remove
any port caps or other flow barriers before connecting any sample line or switching on the
analyzer. Also make sure the exhaust routing is appropriate for your specific application.
CAUTION
Equipment Damage: Provide adequate support for the tubing. The weight of the tubing must not
exert torque on the gas cell as it may cause the fittings to fail and leak.
7.0.2 Preparing Sample Gas Lines
Instructions for installing female ¼” Swagelok

tube fittings on the sample incoming and exhaust
lines:
1. Insert the tubing into the ¼” female Swagelok

tube fitting. Tubing should rest firmly on the
shoulder of the fitting. The nut should be finger tight.
2. Hold the fitting body with a backup wrench and tighten the nut 1¼ turns.