Servomex Servotough SpectraScan 2400, Руководство пользователя

Страница: 45 / 76

SERVOTOUGH SpectraScan User Manual
02400001A/1 43

NOTE
The location of serial number tag is circled in red. If you look carefully, you
can see this instrument's serial number is 100072. Therefore, this
instrument's hostname is “oxs100072”.
Once you know the hostname of your instrument, you may find its IP address in the following way:
1. On a Windows PC attached to the same sub-network as the instrument, open an MS DOS
command prompt.
2 In the command prompt, type “nslookup <hostname>”, where <hostname> is the
instrument's hostname as described above.
3. Nslookup will return all information about the instrument pertinent to networking, including
the IP address it has been assigned.
6.4.3 Setting a static IP address
Some customers prefer to assign a static IP address to their instruments. Assigning a static IP
address requires that you have physical access to the system board.
Connecting to the system board via RS-232 requires the following items:

Windows PC

A special serial cable from Servomex. On one end this cable is terminated by a connector
mating to the RS-232 connector on the system board. On the other end, the cable is
terminated by a DB-9 connector.

If your computer does not have an RS-232 port, you will need an RS-232 to USB converter.
The RS-232 side of the converter should be terminated with a DB-9 connector.

A terminal program running on your PC, such as Hyperterm or PuTTY.
You may configure your instrument to use a static IP address in the following way:
1. Open the instrument, and locate the MPU debug connector. The connector is shown in
Illustration 2. This connector provides access to the MPU via an internal RS-232 port.