SentioLux RTDVD-8100-4CIF Series Скачать руководство пользователя страница 9

Страница: 9 / 101

•

Support HDD standby function.

•

Support hard disk group management.

•

HDD file system is compatible with Windows. Use pre-allocating hard disk management technology, and no disk

fragments.

•

Recording and Playback:

•

Support cycle and non-cycle recording mode.

•

Support normal and event video encoding parameters.

•

Support multiple recording types, including manual, continuous, alarm, motion, motion | alarm and motion &

alarm recording, etc.

•

Support 8 recording time periods with separate recording types.

•

Support Pre-record and Post-record time for alarm and motion detection.

•

Support lock and unlock video files.

•

Support local redundant recording.

•

Support setting hard disk to read only.

•

Support video data search and playback by channel number, recording type, time, etc.

•

Support digital zoom function in playback mode.

•

Support pause, play fast, play slow, skip forward, and skip backward when playback, locating in progress bar by

dragging the mouse.

•

Up to 16-ch synchronous playback.

•

Backup:

•

Support USB device backup.

•

Support SATA CD/DVD-R/W backup.

•

Support backup by file or by time.

•

Support backup device maintenance and management.

•

Support video clips backup when playback.

•

Alarm & Exception:

•

Support alarm in/out arming schedule setting.

•

Support various alarm input such as hard disk full, illegal access, network break, IP conflicted, hard disk error, video

exception, and video output standard mismatch.

•

Support various alarm response such as camera recording, relay out, on screen warning, audible warning and

upload to center, etc.

•

Support auto recovery from exceptions.

•

Network:

•

DS-8108HDI-S, 8116HDI-S and 8100HFI-S series support 10/100/1000M adaptive network interface, and others

support 10/100M adaptive network interface.

•

Support TCP/IP protocols, PPPoE, DHCP, DNS, DDNS, NTP, SMTP and SADP, etc.

•

Support unicast and multicast, support TCP, UDP, and RTP for unicast.

•

Support remote search, playback and download video files, support breakpoint resume.

•

Support remote configuration, support remote import and export of DVR settings.

•

Support remote acquisition of device status, system log and alarm status.

•

Support remote button operation, remote locking and unlocking of panel buttons.

•

Support remote format of hard disk, upgrade, reboot, shutdown and other system maintenance operations.

•

Support RS-232 and RS-485 transparent channel transmission.

•

Support event alarm and exceptions upload to remote management host.

•

Support remote manual recording.

Содержание RTDVD-8100-4CIF Series






































































































Результаты поиска

Содержание RTDVD-8100-4CIF Series

Отзывы:

Похожие инструкции для RTDVD-8100-4CIF Series

Бренды по названию

Популярные бренды

SentioLux RTDVD-8100-4CIF Series, Руководство пользователя

Результаты поиска

Содержание RTDVD-8100-4CIF Series

Отзывы:

Похожие инструкции для RTDVD-8100-4CIF Series

Бренды по названию

Популярные бренды