No.11S098-03
18
STC-GE33OX/GEC33OX
Users guide Rev. 1.03
5) Image data switching method
As explained in the section 3.2.2.1.2, there are three points to extract out the image data from the
Sentech FPGA and the image process at Sentech FPGA after the image data send back from the user
configurable FPGA. There are two different methods to achieve this switching.
A)
By using Sentech GUI “StCamGigEWare_OpDemo”
Also please see
User configurable FPGA (XILINX) Sample Codes
.
a) Select
“OP Setting” under “Option” in the menu.
b) Select which image data sends from
“Sentech FPGA” to “User configurable FPGA” at
“Sentech FPGA -> User FPGA”
c) Select the image process at Sentech FPGA after the image data send back from
“User configurable
FPGA
” at “Process after User FPGA -> Sentech FPGA”
Selection
Color camera
Monochrome camera
CCD data
CCD raw data
CCD raw data
White balance processed data White balance processed image data
CCD raw data
White balance and
White balance processed and
Gamma processed image data
gamma processed data
gamma processed image data
Image data from Sentech FPGA
Selection
Color camera
Monochrome camera
No process
No image data from the User FPGA
No image data from the User FPGA
White balance, gamma and
White balance, gamma and
Gamma processing
color interpolation
color interpolation processing
Gamma and color interpolation Gamma and color interpolation processing
Gamma processing
Color interpolation
color interpolation processing
No processing
Image process at Sentech FPGA after the image data send back from User FPGA
(Table-2) Image data selection from Sentech FPGA
(Table-3) Image process at Sentech FPGA
