Sensornet ORYX DTS, Руководство пользователя

Страница: 72 / 101

Page 66 Oryx DTS User Manual v4
Figure 47 - Setting the Repetition time and number of measurements
The repetition time is the time taken for one complete measurement cycle and
includes the measurement time for each channel and any idle time. For example in
Figure 47, two channels are configured to measure for 30 seconds each with an idle
time of 60 seconds and then the cycle repeats. This gives a repetition time of 2
minutes. The repetition time can be set in seconds, minutes, hours or even days.
To enable the Oryx to log temperature traces continuously, ensure the box is ticked.
Otherwise, enter the total number of measurements to be taken before stopping.
NOTE: The minimum repetition time allowed will be equal to the sum of
measurement times for all active channels.
Uploading the Configuration
On clicking next, the user is prompted that all data on-board the Oryx will be deleted
when the configuration is uploaded (data already downloaded to the PC is
unaffected). The start time of the first measurement can be specified or selected “as
soon as possible” (see Figure 23). Because of the time taken to communicate with
the Oryx and upload the configuration, there may be a delay of up to one repetition
period before the first measurement takes place.