Sensornet ORYX DTS, Руководство пользователя

Страница: 46 / 101

Page 40 Oryx DTS User Manual v4
Installation The name of the current
configuration file
User set
Serial # Oryx serial number Factory set
Next measurement cycle
due at
The time the next
measurement cycle will
start
System ok Green if system healthy
Red on error
Errors will self-clear if the
error condition clears.
State This will be green when th
Oryx is measuring and
yellow when idle.
Onboard Temp Internal temperature of
the Oryx
Unit will shutdown if
outside of operating range
Measurements Number of measurements
stored on the Oryx
PT100 #1&2 Value of the external
PT100 probes
If a system error has occurred, no measurements will take place and one of the
following LED indicators will also be illuminated:
•
Laser error – indicates a failure of the laser, either no output power or
temperature control failed
•
Data acquisition error – indicates an error with the data acquisition module.
•
Supply Voltage – indicates that the power source to the Oryx is outside
acceptable limits
•
Temp error – indicates the Oryx device is currently outside its
environmental operating temperature range
•
General – Other system fault not specifically identified
•
Optics pwr Supply – Indicates that there is a power supply issue to the
Laser
If the ODC fails to communicate with the Oryx, the last reported status fields are
greyed out.