SENKO cookers SG –
Instruction manual
31
5.6.
HEIGHT
ADJUSTMENT
On the cooker base (3)
there are 4 feet with screw
to adjust the height 850 –
920 mm of the cooker.
Adjustment is made by
turning the screw M10 to
the desired height. After
that, the M10 nut needs to
be
tightened
with
a
wrench OK17 to avoid
damaging of the feet.
6.
CLEANING
The cooker and the chimney must be regularly cleaned (at least once a
month).
The ash box (11) and the box area must be cleaned on daily basis. Ash
disposal is to be executed in environmentally acceptable manner and in
accordance with safety procedure.
The glass (20) on the firebox door (6) should be cleaned as necessary
using the soot and grease cleaning agent.
The oven (7) should be cleaned after every instance of use.
To clean the exterior surface, use a soft cloth with a neutral cleaning
fluid. Never use metallic sponges and / or other similar sponge to avoid
damaging the surface! PAINTED SURFACES DO NOT CLEAN WITH
ABRASIVE CLEANING AGENTS!
While cleaning the top side of the cooker, it is necessary to remove the
cooking plate (1) and thoroughly clean the soot from the firebox, around
the oven and flue gas deflector, including the chimney outlet opening (13).
Cooker cleaning is to be performed only when the cooker is inactive
and when it is cold !
Figure 15
