SENKO cookers SG –
Instruction manual
11
3.
TECHNICAL FEATURES
SENKO cookers SG are intended for cooking, baking and household
heating. They are equipped with an oven just like the traditional kitchen
cooker. Cookers are suitable for installation between other kitchen
appliances (with ensuring minimum safety distances – see
chapter 4.1.
).
They are made of stainless steel plates and castings of quality grey
casts. The cooking plate (1) is made of 8 mm thick steel plate OR 6 mm
glass ceramic cooking plate CERAN® (only at certain cooker models).
Cooker interior is lined with chamotte.
The fuel box (only at SG-75 and SG-90 cooker) is on the frontal side of
the cooker, as well as a manual primary air regulator (10) and the flue gas
deflector (14). Between them is a firebox (6) with a grate (16) and the oven
(7) with door and thermometer (18).
On the cooker rear side there is a primary air inlet connection (21) Ø80
mm. Chimney connections (13) Ø120 mm are located on the rear and
lateral sides of the cooker.
The following figures display the schematic of the cookers and their
accompanying parts.
