semaphore TBOX LT2-530 Series, Руководство пользователя, Страница: 72 / 197

Version : 1.09 72
Index Name R/W Description
38
GpsSpeed -
GPS: with a GPS connected to TBox, current speed of TBox, expressed in km/h
39
GpsRoute -
GPS: with a GPS connected to TBox, current direction of TBox, expressed in
degree (0 .. 359.9 degree)
40
AlaPop3
-
Alarm: it indicates the number of alarm needing to be acknowledged by POP3
connection
41
EvenCur *
Alarm: it indicates the current Event ID
42
HardRev
-
HW: it indicates the hardware revision of the CPU
43
Pop3State *
Alarm: indicates the state of POP3 connection. Particularly useful when
monitoring the RTU with POP3 connections. The last value is maintained:
1 Accepted message received
2 Acknowledgment received
10 Invalid message
11 Unknown command
20 Incorrect password
21 Incorrect password or not supplied for a com. Port protected
30 Message received does not match a pre-defined message
44
CntID
*
Low Power: used only with Low Power RTU
45
CntValue *
Low Power: used only with Low Power RTU
46
CntTime
*
Low Power: used only with Low Power RTU
47
CrdIndex -
Datalogging: current position in the table of digital chrono. (circular counter)
48
CrdSize
-
Datalogging: size of the table for digital chrono.(see RTU properties → General)
49
CraIndex -
Datalogging: current position in the table of analog chrono.(circular counter)
50
CraSize
-
Datalogging: size of the table for analog chrono.(see RTU properties → General)
51
CreIndex -
Datalogging: current position in the table of events (circular counter)
52
CreSize -
Datalogging: size of the table of events (see Advanced RTU properties → Alarms)
53
InstState -
System: during sending of a new application, current state of installation
1 Initializing installation
2 Uninstall package XXX
3 Create RTU Infos
4 Flushing I/O buffers
100 Operation is finished
101 ERROR during TEST
102 ERROR during UNINSTALL
103 ERROR during INSTALL
104 ERROR during PLUG & GO
105 ERROR during MD5 verification
106 ERROR application MISSING
107 ERROR BAD INSTALLATION
200 Check package <xx>
300 Install package <xx>
400 Copy to Plug&Go <xx>
500 Checking MD5 <xx>
54
BatUsage -
System: number of seconds the
TB
OX
LT2
has been out of power and SRAM
backed up with lithium battery
The life time of the battery is estimated to 4 years (=126 144 000 seconds)
55
FreeMem -
System: Displays the kBytes of SDRAM memory still available.
The SDRAM is 64 MBytes memory.
It shows the memory used by LINUX, like when establishing a 3G connection, or
when opening a socket for instance. In no case it shows memory used by the
application (datalogging, backup of Tag values, ...) or Operating System.
One should check it never goes below 32 MBytes (=32 000 kBytes), reserved for
..\tmp directory. When sending a new application, it is first sent to ..\tmp
directory before it is flashed