semaphore TBOX LT2-530 Series, Руководство пользователя, Страница: 103 / 197

Version : 1.09 103
Name: Type a name, without SPACE.
This name will be the reference to your
VPN entry, like in the list of
communication ports to protect, or as
default prefix to the communication
variables, ...
Type: Select what
TB
OX
LT2
will be:
"Server" or "Client".
Note that other parties need to support
OpenVPN.
It can be a PC or a TBox.
Connection:
When
TB
OX
LT2
is "Client": you indicate
which communication port is used to
connect to the server.
Select an IP port available.
Server Address :
When
TB
OX
LT2
is "Client": you indicate
the IP address of the server.
In case you access the Server through
Internet, you indicate the public IP
address (or name if accessing through
dyndns for instance).
When
TB
OX
LT2
is "Server": The Server acts as DHCP server, therefore, when VPN tunnel is
built, it attributes an IP address to the “Client” in the range of VPN subnet (see below).
This address is available in the ACV [OpenVPN.IPaddress].
Regarding DNS address, to access sites using names through the VPN connection,
TBox
LT2
receives it from the server
Auto Connect:
By default, TBox connects automatically.
If you uncheck this option, you have to use the digital communication variable
<VPN.VPNcon> to connect/disconnect:

VPN.VPNcon=0 -> exit OpenVPN process

VPN.VPNcon=1 -> restart OpenVPN process
Digital Communication Variable [VPN.HookLink=1] indicates the VPN is up. Writing
[VPN.HookLink=0] disconnects properly VPN connection.
VPN Subnet:
When
TB
OX
LT2
is "Server": you have to indicate the IP subnet of VPN tunnel.
TB
OX
LT2
"Server" acts as DHCP server: the client(s) connecting to
TB
OX
LT2
will
receive an IP address in the range of the subnet.
TB
OX
LT2
"Server" uses the first address of the subnet.
Protocol:
Two transport protocols can be encrypted to build VPN tunnels: UDP or TCP.
Select the one used in the tunnel.
Port:
Select the port used by OpenVPN.
Default: 1194