semaphore TBOX LT2-530 Series, Руководство пользователя, Страница: 46 / 197

Version : 1.09 46
START
Reset all physical outputs: when active, at start-up the RTU reinitializes the outputs to ‘0’. After
that the outputs are monitored according to the process.
When not active, at start-up the outputs are maintained to their last status. After
that, outputs are monitored according to the process (default).
Wait start of condition: this feature relates to alarm condition.
The mechanism of generating alarm is based on transition: the changing of a digital
Tags or the overstepping of an analog threshold.
This option allows changing this rule at start-up:
With ‘Wait start of condition’ active:
With ‘Wait start of condition’ not active: if the alarm condition is true at startup, an internal ‘start of
alarm - auto-ack’ is generated. When the alarm condition
disappears, the alarm is generated.
Activate Plug & Go: Plug & Go feature allows storing the complete TWinSoft project into a SD card.
See chapter 19.3. Micro SD card implementation.
To use the feature, check this option.
Cycle Time: The frequency at which the process cycle is executed can be adjusted from here.
The choices are:
- Full Speed (default). By default it is executed as fast as possible, with no delay
between the cycles.
- 20, 50, 100, 250, 500 ms.
The current time of one cycle can be checked in the RTU identification window.
STOP
Reset All physical outputs at program stop: when this option is active, the RTU reinitializes the
outputs to '0' at stop. This is particularly useful if you want to reset the outputs when
sending a new program, and you want to be sure they stay at '0' during the sending
and restarting sequence.
After that, outputs are monitored according to the process.
Start-up
Alarm
time
Start-up
Alarm
Alarm
internal
Alarm
Alarm
Alarm Alarm
time