semaphore TBOX LT2-530 Series, Руководство пользователя, Страница: 43 / 197

Version : 1.09 43
Sub address: if more than 254 x
TB
OX
must be installed in one project, you need to define a
Sub address. As this is not ModBus standard, it is only supported by ‘TComm.dll’
based software (TWinSoft, TView,… please call your distributor for further
information).
Enter a number between 0 and 255 (default=0).
OS version:
when working Offline, it is the OS used to simulate the compilation.
By default it is the OS version associated to version of TWinSoft.
Telephone number:
Configuration used by TWinSoft when it needs to dial
TB
OX
LT2
.
Sizes:
Number of records of Digital and Analog chronologies. Chronologies represent
the “on event” method of recording data in
TB
OX
LT2
, also known as “Sequence
on Event” recording (see chapter 14: Data logging).
Digital Chronology: max. 32 000 (Default=100).
Analog Chronology: max. 32 000 (Default=100).
Check memory available. See chapter 5.10.2: Compiling an application
Time zone:
The Time Zone where
TB
OX
LT2
is installed.
Timestamped data are recorded internally in
TB
OX
LT2
with universal UTC time
(Universal Coordinated Time). When data is generated from
TB
OX
LT2
the latter
uses this setting to convert UTC time into local time.
See Appendix B : Time in the RTU for more information.
Summer/Winter: Allows automatic management of day light saving. This selection has to be made
according to the location where
TB
OX
LT2
is installed.
See Appendix B : Time in the RTU
7.2. Add-ons
An add-on is a module written in ‘C’ that executes a dedicated task not embedded in Operating System.
Typically, it is communication to SCADA, like DNP.3 or IEC protocols or communication to PLC like AB (DF1),
OMRON, ...
It can be also specific tasks, like AGA calculation.
Check add-ons availability at
http://helpdesk.servelec-technologies.com
7.3. Protection
Access security is discussed at chapter 17.