semaphore TBOX LT2-530 Series, Руководство пользователя, Страница: 71 / 197

Version : 1.09 71
Index Name R/W Description
12
UtcTim -
Time: Universal Coordinated Time (UTC). It is the number of seconds since
01/01/1970, GMT time. It is used as time-stamp reference for datalogging.
13
ZonBia *
Time: Time difference in seconds with GMT.
14
ZonID
*
Time: ID of the zone where
TB
OX
LT2
has been installed. It uses by default
Regional Settings of PC. It can be changed from RTU properties.
15
WeYear *
Time: week of the year (*)
16
CycTim
*
Time: time for one cycle of the program (BASIC and Ladder). This register is
refreshed after each cycle.
Within the program, you could compute this register to memorize the highest
value.
17
AAcond
-
Alarms: Quantity of alarm conditions, which are still active.
18
LevId -
Events: absolute number of the last event (0…65535).
19
AppVer
-
Application version: according to the ‘version’ indicated in the ‘Info’ of the RTU
properties. This register returns a version in a WORD format: 0…65535
20
OsVer -
Operating System: version: running in
TB
OX
LT2.
21
OsBuil -
Operating System: build number of the OS running in
TB
OX
LT2.
22
LoaVer
-
Loader version: Not available with
TB
OX
LT2.
23
LoaBui -
Loader build: Not available with
TB
OX
LT2.
24
PortIdLog
*
TCP Log: Not needed with
TB
OX
LT2
. All logs available from TWinSoft main menu:
‘Communication’

‘Retrieve from TBox’

‘Trace Log’.
25
EventLog -
TCP Log: Not needed (see above)
26
MilliS -
TIME:
With CPU-16: 10 milliseconds tik
With CPU-32 and –LT2: 1 millisecond tik
27
GpsLat -
GPS: current latitude given by the external GPS (ACC-GPS on COM1).
Latitude in degrees multiplied by 1000000 (example: 50123456 means 50
d 0.123456 degree). Resolution : 11 cm. Precision 15 meters
28
GpsLong
*
GPS: current longitude given by the external GPS (ACC-GPS on COM1).
Longitude in degrees multiplied by 1000000 (example: 7123456 means 7 d
0.123456 degree). Resolution : 11 cm. Precision 15 meters
29
GpsAlt
-
GPS: current altitude given by the external GPS (ACC-GPS on COM1).
Altitude in meters. Resolution, 1 meter. Precision: depends on the quantity of
satellites. Poor precision
30
GpsSats -
GPS: quantity of satellites detected by the external GPS (ACC-GPS on COM1). Must
be of minimum 3, or even 4 to expect a good precision.
31
Rerout
*
Modbus: variable 16 bits, each representing a COM Port from 1 to 16. The bits
corresponding to the Ports in Rerouting are at 1, others at 0. Can be use to set
the mask.
32
MasterErr *
Communication: indicates the last station ID (ModBus station) in communication
error. Once an error has been detected, the value is maintained until next error.
Usually, communication errors can be solved by modifying the time-out available
in the ‘Advanced’ tab of the communication used (End of Fame Detection, IFG, Rx
Time-out). To trace an error, we advise you to reset the variable and check it when
it is different from 0.
When this happens, you can handle it in your process and reset the variable, that it
is ready for the next error
33
CardErr
*
System: this variable indicates card(s) in error. For TBox-MS only
34
CPUusage -
Low Power: Not available with
TB
OX
LT2
. Used with Low Power RTU only.
35
SerialNb -
Hardware: indicates the S/N. of the CPU (see sticker on the side of the card).
36
CPUmode -
Redundancy: for TB
OX
MS32 only
37
OpenSoc
TCP/IP: number of sockets opened. Not available with
TB
OX
LT2