SELMI ROASTER CENTOVENTI, Инструкция по установке, эксплуатации и обслуживанию

Страница: 37 / 50

37
check the functionality of the interlocking
parts and of the safety devices. Make sure
to re-activate them if they were previously
deactivated
3) Make sure that no extraneous components
have been left in the machine, especially
mechanical parts, utensils or components
used for maintenance that could cause
damage to the machine or put personnel at
risk.
4) Before switching the machine back on
make sure that all personnel are at a safety
distance.
5) Before restarting the processing, the
maintenance technician must check the
entire working cycle, the functionality of the
safety mechanisms and the integrity of the
fixed protective panels.
6) before restarting the working cycle the
machine must be cleaned according to the
instructions in section 6.3.
Attention
Following every maintenance intervention it is
the Safety Officer duty to ascertain that the
machine is working properly and that all the
safety devices are present and functional.
Unless expressly required for the solution of a
breakdown, never interfere with the adjustments and
positioning of the limit microswitches; their tempering
can cause serious damage to the machine and pose
risks to the operator.
Before assembling a block always cover with a thin
layer of alimentary grade oil the internal parts and
coupled surfaces. replace all the seals and gaskets
with original parts before reassembling the
components.
Note
Before reinstalling the machine components
that have been washed with water or other
liquids, check that they are completely
dry.
Work on electrical components must only be carried
out by the electrical maintenance technician
specially trained and authorized by the Safety
Officer.