SELMI ROASTER CENTOVENTI, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 50

23
2.3. Safety symbols and plaques
The machine has a number of plaques with symbols
and/or safety messages stuck to it.
Attention
Make sure that all the safety messages are
legible and in good condition.
Replace the damaged plaques with the new ones from
the manufacturer. If a plaque happens to be on a part
that is being replaced, make sure that a plaque is
present on the new piece. For the cleaning of the
plaques consult the appropriate section (6.3).
ATTENTION
THE PERFORMANCE OF WORK ON ELECTRICAL EQUIPMENT
CONNECTED TO THE POWER SUPPLY IS STRICTLY
FORBIDDEN

ANY EXCEPTIONS MUST BE AUTHORISED BY THE
EXECUTIVE MANAGER

IN PARTICULARLY DANGEROUS SITUATIONS, ANOTHER
PERSON MUST BE PRESENT IN ADDITION TO THE
PERSON PERFORMING THE WORK
WORK MAY ONLY BEGIN WHEN THE SAFETY MEASURES
HAVE BEEN IMPLEMENTED
IN OBSERVANCE OF PRESIDENTIAL DECREE 543 ON THE
PREVENTION OF ACCIDENTS
(positioned on the door of the electrical panel)
Label indicating compulsory reading of the manual
(positioned on the front of the machine)
2.4. Safety and protection devices
Attention
The components shown here are particularly
important for the safety of the operator and the
machine. In cases of malfunction or wear they
must be replaced with spare parts supplied or
authorized by the manufacturer.
While the machine is in use all the protection
devices must be correctly installed.
The safety devices present on the machine are:

Mushroom emergency button with mechanical
unblock mechanism.
There is an emergency stop mushroom button on the
machine. Pushing it cuts voltage to all live parts by
means of appropriate devices. To reset it, release the
emergency button by turning its head and then push
the RESET button shown in the photo.
Before starting every shift, press it to make sure that it
works properly.