manualshive.com logo in svg

Sel 751A, Инструкция по эксплуатации


Поделиться
Скачать
background image

F.3

Date Code 20100129

Instruction Manual

SEL-751A Relay

IEC 61850 Communications

IEC 61850 Operation

IEC 61850 Operation

Ethernet Networking

IEC 61850 and Ethernet networking are available as options in the SEL-751A. 
In addition to IEC 61850, the Ethernet port provides support protocols and 
data exchange, including FTP and Telnet. Access the SEL-751A Port 1 
settings to configure all of the Ethernet settings, including IEC 61850 network 
settings.

The SEL Ethernet port supports IEC 61850 services, including transport of 
logical node objects, over TCP/IP. The Ethernet port can coordinate a 
maximum of six concurrent IEC 61850 sessions.

Object Models

The IEC 61850 standard relies heavily on the Abstract Communication 
Service Interface (ACSI) model to define a set of service and the responses to 
those services. In terms of network behavior, abstract modeling enables all 
IEDs to act identically. These abstract models are used to create objects (data 
items) and services that exist independently of any underlying protocols. 
These objects are in conformance with the common data class (CDC) 
specification IEC 61850 7 3, which describes the type and structure of each 
element within a logical node. CDCs for status, measurements, controllable 
analogs and statuses, and settings all have unique CDC attributes. Each CDC 
attribute belongs to a set of functional constraints that groups the attributes 
into specific categories such as status (ST), description (DC), and substituted 
value (SV). Functional constraints, CDCs and CDC attributes are used as 
building blocks for defining Local Nodes.

UCA2 uses GOMSFE (Generic Object Models for Substation and Feeder 
Equipment) to present data from station IEDs as a series of objects called 
models or bricks. The IEC working group has incorporated GOMSFE 
concepts into the standard, with some modifications to terminology; one 
change was the renaming of bricks to logical nodes. Each logical node 
represents a group of data (controls, status, measurements, etc.) associated 
with a particular function. For example, the MMXU logical node (polyphase 
measurement unit) contains measurement data and other points associated 
with three-phase metering including voltages and currents. Each IED may 
contain many functions such as protection, metering, and control. Multiple 
logical nodes represent the functions in multifunction devices.

Logical nodes can be organized into logical devices that are similar to 
directories on a computer disk. As represented in the IEC 61850 network, 
each physical device can contain many logical devices, and each logical 
device can contain many logical nodes. Many relays, meters, and other IEC 
61850 devices contain one primary logical device where all models are 
organized.

IEC 61850 devices are capable of self-description. You do not need to refer to 
the specifications for the logical nodes, measurements, and other components 
to request data from another IEC 61850 device. IEC 61850 clients can request 
and display a list and description of the data available in an IEC 61850 server 
device. This process is similar to the autoconfiguration process used within 
SEL communications processors (SEL-2032 and SEL-2030). Simply run an 
MMS browser to query devices on an IEC 61850 network and discover what 
data are available. Self-description also permits extensions to both standard 
and custom data models. Instead of having to look up data in a profile stored 
in its database, an IEC 61850 client can simply query an IEC 61850 device 
and receive a description of all logical devices, logical nodes, and available 
data.

Содержание 751A

































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 751A

Jabra SPEAK 410 User Manual preview
SPEAK 410
Бренд: Jabra Страницы: 6
CHICAGO 46319 Assembly And Operating Instructions preview
46319
Бренд: CHICAGO Страницы: 4
Myryad MXC7000 Owner'S Manual preview
MXC7000
Бренд: Myryad Страницы: 12
GE 169 Instruction Manual preview
169
Бренд: GE Страницы: 94
GE AMCB6TEDL Installation Instructions preview
AMCB6TEDL
Бренд: GE Страницы: 2
Crestron VT-3500IMW Connection Manual preview
VT-3500IMW
Бренд: Crestron Страницы: 1
Sony HVL-RLS Instruction & Operation Manual preview
HVL-RLS
Бренд: Sony Страницы: 2
Sony HVL-20DMA Instruction & Operation Manual preview
HVL-20DMA
Бренд: Sony Страницы: 2
Sony ECM-XYST1M Operating Instructions preview
ECM-XYST1M
Бренд: Sony Страницы: 2
Sony CRX85U User Manual preview
CRX85U
Бренд: Sony Страницы: 2
Sony CMT-U1BT - Micro Hi-fi Component System Specifications preview
CMT-U1BT - Micro Hi-fi Component System
Бренд: Sony Страницы: 2
Sony CMT-HX7BT Specifications preview
CMT-HX7BT
Бренд: Sony Страницы: 2
Sony CMT-NEZ3 - Micro Hi Fi Component System Operating Instructions Manual preview
CMT-NEZ3 - Micro Hi Fi Component System
Бренд: Sony Страницы: 32
Sony CMT-U1BT - Micro Hi-fi Component System Operating Instructions Manual preview
CMT-U1BT - Micro Hi-fi Component System
Бренд: Sony Страницы: 36
Sony CMT-HX7BT Operating Instructions Manual preview
CMT-HX7BT
Бренд: Sony Страницы: 43
Sony CMT-DV2D - Micro Hi Fi Component System Operating Instructions Manual preview
CMT-DV2D - Micro Hi Fi Component System
Бренд: Sony Страницы: 54
Sony CPD-G52 Service Manual preview
CPD-G52
Бренд: Sony Страницы: 61
Sony KV-13M series Service Manual preview
KV-13M series
Бренд: Sony Страницы: 94

Бренды по названию

Популярные бренды

Загрузить еще бренды