-23-
8.6 other specifications
Specification Area
Units (or Method)
Specification Value
Light Source
Light Emitting Diode
Lifespan
Hours
Light Emitting Diode should
operate minimum 30,000
hours before maintenance is
required.
Flux, CRI, CCT, Numerical Aperture
Depends on customer
configuration - consult factory
Line Input Power Voltage Range
Voltage
100 - 240
Line Input Power Frequency Range Frequency
50 - 60 Hz
Line Input Power Current Range
Amperes
1.5
Total Power Consumption
Watts
100
Temperature: Operating
Degrees Celsius
0 - 40
Temperature: Storage
Degrees Celsius
0 - 50
Relative Humidity: Operation
50% - 75% Non-Condensing
Relative Humidity: Storage
30% - 75% Non-Condensing
Atmospheric Pressure: Operating
Hpa
700 - 1060
Thread Pitch (For Pole Mounting)
UNC
10 - 32
Dimming Levels
1024
Modes
RUN, STANDBY
Fuses
250VAC 1.5A, GMA 5mm X 20mm
9.0 Limited Warranty
Your LED light source carries a 3-year warranty from the date of shipment on workmanship and all defects of material,
excluding replaceable sweatbands, headband, fiberoptic cable and lamps. Should your product prove to have such
defects within three years of the shipment. Seiler Instrument will repair or replace the product or component part with-
out charge. Should your LED Light Source product(s) need servicing under this warranty, please contact, Seiler Instru-
ment return authorization documentation. You should carefully pack unit in a sturdy carton and ship it to the factory.
Please include a note describing the defects, your name, telephone number and a return address. Warranty does not
cover equipment subject to misuse, accidental damage, normal wear and tear or if transferred to a new owner without
authorization from Seiler Instrument. This warranty gives you specific legal rights and you may also have other rights
that vary from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to the factory. Your product
will be inspected and an estimate of repair charges will be submitted to you for approval. Payment must be received
before repairs are completed.
• In the US: 800-489-2282 (toll free)
• FAX number: 314-968-3601
• Customer Service: 314-218-6336
10. END OF PRODUCT LIFE
We encourage our customers to recycle this product whenever possible. Disposal of this unit must be performed in accordance
with the applicable local environmental regulations.
In the United States a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to manufacturer at the end of product life.
