-6-
Colposcope Head
optic pod components
cleaning
The Objective, at the bottom of the Colposcope body, may be exposed to blood and other bodily fluids.
Spots on the objective dim the passage of light.
Alcohol or warm water in a mild detergent, applied with a clean cotton swab can be used to remove all
smudges. Apply with soft and CIRCULAR movements. Follow your laboratory’s procedures to remove
bloodstains or other contaminants from your equipment.
If the objective is too blotched, change to another cotton swab for each circular movement to avoid
spreading the impurities again.
The Objective lens can be protected by use of the Sterilizable Protector Cap. It is fitted on the external
diameter of the objective lens and protects it against mechanical damage and against contamination.
(catalog #6132000)
Clean the metallic parts (chrome-plated or painted) with cotton, alcohol or mild detergent.
Lubrication
It is recommended to lubricate the Colposcope head after 5 years of use.
Eyepieces
Binocular Head
Thumb Screw
Magnification Turret
Objective Lens
Fine Focus Knob
Green Filter (Push/Pull Knob)
Handle
