-14-
This device is capable of causing
a fire, burns, or ignition of
flammable materials.
Do not locate or operate the unit near any flammable materials including
flammable gases and liquids.
Maintain at least 6” around the fan intakes and exhausts for adequate
ventilation to prevent overheating.
Do not operate the device unless an approved light cable is connected
between the device and the relevant system. Energy exiting the light
cable is concentrated and can cause burns or fires – always ensure that
the light cable is properly installed before powering the device.
This device emits some level of
electromagnetic energy.
Select an appropriate location and power source for the unit as described
below.
Ensure there is adequate separation distance between the unit and any
device which may be affected by the electromagnetic energy coming
from the unit.
Power the unit from a circuit different from any circuit that contains a
device that could be affected by the electromagnetic energy from the
illuminator.
Failure to read and understand
these Instructions for Use is
hazardous.
Personnel tasked with installation of the device should fully familiarize
themselves with the contents of these Instructions for Use and only
attempt installation or maintenance of the device once they have a
complete understanding of these Instructions.
Failure to select an appropriate
installation location is
hazardous
Employ only authorized and properly trained personnel to perform the
installation.
Care must be exercised during the mounting of the unit. Fasteners of
incorrect length can damage internal circuitry and circuit boards.
3.0 HAZARDS ASSOCIATED WITH IMPROPER INSTALLATION
