Segway Personal Transporter i2, Руководство по замене запчастей

Страница: 97 / 126

Segway® Personal Transporter i2, x2, x2 Turf Parts Replacement Guide 12 ‐ 1
12. Balance Sensor Assembly
This chapter describes removal and installation procedures for
the balance sensor assembly (BSA) on a Gen 2 Segway PT.
The following warnings apply to instructions in this Section 12
regarding the Balance Sensor Assembly:
Failure to do so
could result in
serious injury or
death.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
Failure to do so
could result in
serious injury or
death or damage to
property.
Read
all
instructions.
Power off
the Segway PT.
Unplug
the
Segway PT.
Remove
battery packs.
Applies to Models
i2, x2, x2 Turf
Qualifications
Certified Service Technician
Technician Replaceable Parts
Balance Sensor Assembly (19457 ‐ 00002)
Fasteners not included
Balance Sensor Assembly Fastener
(20566 ‐ 00001)
(4) Fasteners, pan ‐ head, self ‐ tapping,
M3 x 0.5 x 12
Required Tools
•
T ‐ 10 torque wrench
•
T ‐ 10 6 ‐ lobe wrench