Galeo S / Galeo S Sub
3 Safety instructions
6
fied specialists for repairs.
Do not expose the loudspeaker to rain, and avoid operating in envi-
ronments below -5° C or above 40° C. Be aware of the possibility of
condensation forming inside the housing due to rapid changes in
temperature. Allow the loudspeaker to adjust to ambient temperature
before operation.
To prevent overheating, do not operate the loudspeaker in the direct
vicinity of strong heat sources, and avoid direct sunlight. After long
periods of operation, the loudspeaker, particularly metallic compo-
nents such as the pole mount and the connector panel, can reach
temperatures exceeding 40° C.
The components of the rigging system described here (Flying Frame,
ball-lock pins, load adapter) are only to be used with SEEBURG
Galeo S and Galeo S Sub systems in the manner described here
(specified normal use)!
Make sure that the limit loads specified in this manual are not ex-
ceeded and also that the suspension points are intended for the pur-
pose and are sufficiently load-bearing!
Observe all relevant regulations for accident prevention. Make sure
that suitable protective equipment (gloves, shoes, helmet) is worn
during installation and de-rigging!
While moving the loads with chain and / or rope hoists, nobody is
allowed to be in the danger zone below the array! A speaker array is
not a ladder: climbing on it is prohibited!