Galeo S / Galeo S Sub
7 Installing the line array system
22
7.6
Mounting Galeo S Sub Units to the Flying Frame
To fly Galeo S Subs, a Galeo S Flying Frame is required because it provides the necessary four
front/rear links. The method for mounting using the Snap-Fly links is the same as for the Galeo S
elements, as described in section 7.2. The maximum number of Galeo S Subs permissible on one
Flying Frame is described in section 5.
7.7
Mounting Galeo S units under flown Galeo S Sub units
It’s possible to mount Galeo S units under flown Galeo S Subs by
using a further Galeo S Flying Frame
that’s mounted under the low-
est Galeo S Sub. The maximum number of flown subwoofers and
Galeo S units can be found in the description in section 5.3. For the
flown Galeo S Subs it is recommended to use the same controller
setup as for the ones on the ground.
7.8
Mounting the Galeo S Flying Cradle on a speaker pole
On the underside of the Flying Cradle is a socket with a female M20
thread. This thread is intended for a TV-spigot with an M20 male
thread or a speaker stand flange adapter with an M20 male thread.
Using these accessories, up to four Galeo S elements can be
mounted directly on a speaker stand or speaker pole (with a 28 mm.
TV-spigot adapter socket or 35 mm outside diameter).
