Galeo S / Galeo S Sub
7 Installing the line array system
24
Galeo S unit, mounted on a Galeo S Flying Cradle with maximum downtilt
When mounting Galeo S units on a Flying Frame or Flying Cradle, the Center Link of the bottom
Galeo S is connected to the Indexed Center Rail of the Frame or Cradle using a Link Pin. The ap-
propriate hole in the mounting rail is marked on the Frame (pin point 16) and on the Cradle (pin
point 17). The front links of the bottom Galeo S unit are connected to the Flying Frame using the
Snap-Fly Links on the Frame, or to the upper side of the front links of the Flying Cradle using Lock-
ing Pins.
To set the maximum possible 7° downtilt for the bottom Galeo S element, the Stop Pin on this ele-
ment must be in the 0° position in the Indexed Centre Rail. When the Stop Pin of this Galeo S ele-
ment is in the 7° position, the element has 0° tilt. For applications with an upwards raising audience
area (e.g. grandstands), a negative tilt angle for the system can be set.
Galeo S tilt angle
Stop Pin Position in the
Galeo S Indexed Center Rail
-9°
Stop Pin not set
-8°
15
-7°
14
-6°
13
-5°
12
-4°
11
-3°
10
-2°
9
-1°
8
0°
7°
1°
6°
2°
5°
3°
4°
4°
3°
5°
2°
6°
1°
7°
0°
