SeaSpace TeraScan 1.5M, Руководство по эксплуатации и обслуживанию

Страница: 101 / 232

TeraScan 1.5m Polar Satellite Tracking Antenna O & M Manual
85
5.2 A
NTENNA
M
ONITORING
5.2.1 Trackeye
To observe the motion of the antenna, the signal strength from the receiver, and the progress of the frame
synchronizer, enter the command:
% trackeye full chain
<Return>
The trackeye command should be run from a long 3-line window on the screen.
Display Format (Normal):
yyyy/mm/dd hh:mm:ss.sss azim elev head mo freq #lin S Sig fsync
The meaning of the list fields is as follows:
azim: antenna azimuth command relative to the mounting of the antenna. If the antenna is
ship-mounted, this angle is relative to the bow of the ship.
elev: antenna elevation command, absolute, in degrees.
head: ship heading (if used) in degrees, True North.
mo: motion of the antenna:
- = no change (antenna is not tracking)
A = antenna is ascending
D
= antenna id descending
* = antenna is tracking. No elevation change yet.
(The letter
R precedes the motion if autoalign or align is running.
freq: frequency in MHz of the receiver.
# lin: number of scan lines acquired in this pass by the frame synchronizer.
s: bit sync switch data state:
N = Normal
I = Inverted
sig: signal strength.
fsync: frame sync status:
SEARCH
= searching for start of frame
LOCK = locked to start of frame
Note: To exit trackeye , enter Control-C.