SeaSpace TeraScan 1.5M, Руководство по эксплуатации и обслуживанию

Страница: 198 / 232

182
SeaSpace Corporation
10.3 S
OFTWARE
C
OMMANDS AND
F
ILES
10.3.1 ac
ac chain az xxx.x
Move to azimuth xx.x degrees (0-360.0).
el xxx.x
Move to elevation xxx.x degrees (0-90.0).
cl xx.x
Move to cross-level xx.x degrees.
Note: Cross-level angle must be 72 to 108 degrees.
eltorque
Test antenna torque on the elevation.
Read motor load from PCU.
cltorque
Test antenna torque on the cross level beam.
Read motor load from PCU.
pos
Read position of antenna, high precision.
[0.0, 360.0] degrees = [0000, FFFF] counts.
reset
Reset the PCU.
version
Report PCU Prom version.
head
Report current ship heading.
(n)
Output command n during tracking.
(No wait for the antenna program).
st
Read antenna status.
^0070
Set PCU to Fast Reference mode.
^0071
Set PCU to Satellite Reference mode
(Sea-going antenna).
^0000
Gyro mode (land-based antenna)
NVRAM
Update PCU NVRAM
?
List command set for this type of antenna.
x
Get motor torque for cross level, elevation, and azimuth motors.
O00xy O0000
= L-Band feed polarity select.
O0001
= S-Band feed polarity select.
program FILE_NAME
Loads program named FILE_NAME into 6003AL PCU.
Example:
program x03-268L.s19
Before running this command, make sure no pass is
scheduled to be tracked for 15 minutes, and make sure the
antenna is not being initialized. After running this comand,
reset the antnna (
ac chain reset
).