18
Fig. 29
INITIAL TEST AND STARTING OF THE AUTOMATION
After having completed the necessary operations for a correct installation of the Super Full Tank product, as described
in this manual, and after having valuated all resting risks which could arise in any installation,
it is necessary to test
the automation to guaranty the maximum security and, in particular way, to guaranty that the laws and norms
of this sector are fully respected
. Especially
the test must be executed following the norm
EN
12445
which establishes the methods of tests for
checking the gate automations respecting the
limits established by the rule
EN 12453.
SAFETY PRECAUTIONS:
All electrical work should conform to current regulations. A 16 A 0,030 A differential switch must be incorporated into
the source of the operators main electrical supply and the entire system properly earth bonded. Always run mains
carrying cables in separate ducts to low voltage control cables to prevent mains interference.
INTENDED USE:
The operator Super Full Tank has been planed to be used for the automation of swing gate operator only.
SPARE PARTS:
To obtain spare parts contact:
SEA USA Inc. 10850 N.W. 21st unit 160 DORAL MIAMI (FL) 33172 - www.sea-usa.com
SAFETY AND ENVIRONMENTAL COMPATIBILITY:
Don’t waste product packing materials and/or circuits.
When being transported this product must be properly packaged and handled with care.
LIMIT OF GUARANTEE
For the guarantee see the sales conditions on the official SEA price list.
MAINTENANCE AND OUT OF SERVICE:
The decommission and maintenance of this unit must only be carried out by specialised and authorised personnel.
NOTE:
THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE OR INJURY
CAUSED BY IMPROPER USE OF THIS PRODUCT
SEA
reserves the right to do changes or variations that may be necessary to its products with no obligation to notice
Fig. 28
RISK EXAMINATION
The points pointed by arrows
are potentially dangerous. The installer must take a thorough risk
in fig. 54
examination to prevent crushing, conveying, cutting, grappling, trapping so as to guarantee a safe
installation for people, things and animals. (
Re. Laws in force in the country where installation has been
made
). As for misunderstandings that may arise refer to your area distributor or call our help desk. These
instructions are part of the device and must be kept in a well known place. The installer shall follow the
provided intructions thoroughly.
products must
SEA USA Inc.
only be used to automise doors, gates and lwings. Any initiative
taken without
explicit authorization will preserve
SEA USA Inc.
the manufacturer from whatsoever responsibility. The installer
shall provide warning notices on not assessable further risks.
SEA USA Inc.
in its relentless aim to improve the products, is
allowed to make whatsoever adjustment without giving notice.
This doesn’t oblige
to up-grade the past
SEA USA Inc.
production.
can not be deemed responsible for
SEA USA Inc.
any damage or accident caused by product breaking, being
damages or accidents due to a failure to comply with the instructions herein. The guarantee will be void and
the manufacturer responsibility will be nullified if
original spare parts are not being used.
SEA USA Inc.
The
electrical installation shall be carried out by a professional technician who will releasedocumentation as
requested by the laws in force.
Packaging materials such as plastic bags, foam polystyrene, nails etc must
be kept out of children’s reach as dangers may arise.
International registered trademark n. 2.777.971
