12
INSTALLATION OF REAR BRACKET
Fig. 11
Fig. 12
(1)
PRELIMINARY:
- Open carefully the package, making
sure not to loose parts which are listed in
Fig. 4
- Attach the rear oscillating bracket as
shown in Fig. 11
.
Attention
:
Do not use a hammer for the
insertion of the short brass pin
; its fitting
into the bracket and clevis attachment must
be done by the simple pressure of the hands.
Attention:
Do not incline the hydraulic
operator further than the allowed angle of the
oscillating bracket (1), risks the possible
braking of it.
INSTALLATION OF THE OSCILLATING REAR BRACKET
The rear bracket must first be cut respecting the quote “a” on page 10 and then welded as in Fig. 13
The support must be positioned so that the operator is perfectly leveled (Fig. 13 and Fig. 15)
Fig. 13
6,69"
Fig. 14
3,34'’
5,31'’
2,76'’
1,18'’
1,18'’
3,34'’
2,76"