Section 04
ENGINE
Subsection 04
(MAGNETO SYSTEM)
SMR2000-009_04_04A.FM
04-04-11
Battery Charging Coil
Position new coil, crimp and solder all wires.
Prior to assembly, apply Loctite 243 (blue).
Use magneto coil centering tool (P/N 420 876 922)
and install it so that it fits around armature plate
before tightening screws
no. 23
.
1. Magneto coil centering tool (P/N 420 876 922)
Magneto Flywheel and Ring Gear
Apply Loctite 648 (green) to magneto flywheel
mating surface. Lay ring gear on a steel plate, then
heat with a propane torch in order to install it on
magneto flywheel.
Pay particular attention to position ring gear teeth
chamfer side as per following illustration.
1. Teeth chamfer
NOTE:
Ensure that ring gear contacts magneto
flywheel flange.
Whenever replacing either ring gear or magneto
flywheel, Gun Kote must be applied to prevent
possible corrosion.
CAUTION:
Always assemble magneto flywheel
and ring gear prior to apply Gun Kote. If not done
correctly, ring gear won’t contact magneto fly-
wheel flange.
To apply Gun Kote proceed as follows:
1. Clean thoroughly and degrease replacement
part using a non oil base solvent.
2. Apply coating in light thin coats using a spray
gun.
NOTE:
Do not spray Gun Kote into magneto fly-
wheel threaded holes.
3. Bake parts in oven at 175
°
C (350
°
F) for 1 hour
to cure Gun Kote.
CAUTION:
Do not eliminate Gun Kote heat cur-
ing time because it will lose all its resistance
and it will not give any protection.
Magneto Housing
Install gasket
no. 24
between magneto housing
no. 5
and engine crankcase.
Install magneto housing and torque screws
no. 16
to 9 N•m (80 lbf•
in
).
Armature Plate
Position the armature plate on the crankcase,
aligning the marks on both parts.
When reinstalling armature plate on a new crank-
case housing, proceed as follows.
Find manufacturer’s mark on armature plate. In
line with this mark, punch another mark on adja-
cent crankcase lug.
TYPICAL
1. Manufacturer’s mark on armature plate
2. Punch a mark on crankcase lug aligned with plate mark
F00D0AA
1
F01D3BA
1
F01D4FA
2
1
www.SeaDooManuals.net
Содержание 2001 GS
