Section 08
ELECTRICAL SYSTEM
Subsection 03
(CHARGING SYSTEM)
SMR2000-022_08_03A.FM
08-03-3
DYNAMIC TEST
1. Disconnect the magneto wiring harness connec-
tor.
2. Install the 4-pin magneto harness adapter (P/N
295 000 131).
3. Connect test probes of the multimeter to the
YELLOW and YELLOW/BLACK wires of the 4-pin
magneto harness adapter.
4. Start and rev engine to 3500 RPM. The obtained
value should be between 25 and 40 Vac.
5. If the battery charging coil is out of specifica-
tion, replace it.
Stator
947 Engine
STATIC TEST: CONTINUITY
1. Disconnect the magneto wiring harness connec-
tor.
2. Install the 6-pin magneto harness adapter (P/N
295 000 136).
3. Check resistance between two of the YELLOW
wires. The resistance should be between 0.1 to
1.0 ohm.
1. Multimeter
2. Magneto harness adapter
3. YELLOW wires
4. Place either meter lead into the remaining YEL-
LOW wire and note the resistance (same as
step no. 3). If the readings are out of specifica-
tion, the stator will need to be replaced.
STATIC TEST: INSULATION
1. Disconnect the magneto wiring harness connec-
tor.
2. Install the 6-pin magneto harness adapter (P/N
295 000 136).
3. Insert multimeter positive (+) probe to one of
the YELLOW wire of the 6-pin magneto harness
adapter.
4. Ground the multimeter negative (-) probe to the
engine or the stator iron core and note the read-
ing.
1. Multimeter
2. Magneto harness adapter
3. Positive (+) probe to YELLOW wire
4. Negative (-) probe to ground
5. Repeat test with the other two YELLOW wires of
the 6-pin magneto harness adapter.
NOTE:
There should be no continuity (infinity) be-
tween the stator insulated coils and ground. If
there is a reading, the stator coils and/or the wir-
ing from the coils is grounded and needs to be
replaced or repaired.
DYNAMIC TEST
1. Disconnect the magneto wiring harness connec-
tor.
2. Install the 6-pin magneto harness adapter (P/N
295 000 136).
3. Connect test probes of the multimeter to two
of the YELLOW wires of the 6-pin magneto har-
ness adapter.
4. Set multimeter to Vac scale.
5. Start and rev engine to 3500 RPM. The obtained
value should be between 45 and 70 Vac.
6. If the stator is out of specification, replace it.
F01H5ZA
1
3
3 2
F01H60A
1
3
2
4
www.SeaDooManuals.net
Содержание 2001 GS
