Using Your SDX Telephone
Using Your SDX Telephone – Page
– Page 13
13
SDX 10/20/40E - FT-2/3/4 Terminal Guide
SDX 10/20/40E - FT-2/3/4 Terminal Guide
39HTN00
39HTN000026PEA - Issue 6 (April 1997)
0026PEA - Issue 6 (April 1997)
Call Back
Call Back
If you call an extension and find that it is busy or does not answer (or one
in office), then you can tell SDX to ring you when the extension is free or
is available (has returned and used terminal). When you use Call Back
Call Back,
the receiving terminal’s display indicates who is requesting a Call Back
Call Back
when the system sets up the call.
To request a terminal to Call Back when free/available
To request a terminal to Call Back when free/available::
1. Dial an extension and hear busy or no answer.
2. Press Call Back
Call Back and replace the handset. You can make and receive
other calls while waiting.
3. When you and the other party are both free, your terminal rings.
4. When you answer, the other terminal starts to ring.
To cancel Call Back
To cancel Call Back::
1. Press Call Back
Call Back again.
No Calls
No Calls
When you do not wish to receive calls, you can instruct SDX to return the
Number Unobtainable tone to all your incoming calls. To avoid delaying a
call, store a call Diversion
Diversion number and use the Divert
Divert facility.
To set No Calls
To set No Calls::
1. Press No Calls
No Calls and display shows the No Calls
No Calls symbol
.
If you have no set a Divert All Calls
Divert All Calls number, the No Calls
No Calls symbol will
flash, otherwise it will be steady.
To cancel No Calls
To cancel No Calls::
1. Press No Calls
No Calls again.
Confer
Confer
With SDX 20/40E you can hold a three party Conference
Conference call with either
two other extensions or with one other extension and one external line.
To set up a Conference call
To set up a Conference call::
1. With a call in progress press Confer
Confer (the symbol flashes).
2. Call third party (internal or external).
3. Press Confer
Confer to establish conference (the symbol goes steady).
To leave a Conference call
To leave a Conference call::
1. Replace handset.
User Confer
Confer to connect an enquiry and a Held
Held call into a three party call.