Using Your SDX Telephone
Using Your SDX Telephone – Page
– Page 11
11
SDX 10/20/40E - FT-2/3/4 Terminal Guide
SDX 10/20/40E - FT-2/3/4 Terminal Guide
39HTN00
39HTN000026PEA - Issue 6 (April 1997)
0026PEA - Issue 6 (April 1997)
PABX Installations
PABX Installations
To Recall the PABX operator
To Recall the PABX operator::
1. Press PP.
2. Wait for a PABX dial tone.
3. Dial code for operator.
To Transfer to a PABX telephone
To Transfer to a PABX telephone::
1. Press PP.
2. Wait for PABX dial tone.
3. Dial required PABX telephone number and replace handset.
Behind a PABX
Behind a PABX
If SDX is installed “behind” a PABX, dialling 9
9 will give you a line to the
PABX, and you will have to dial another digit, usually 99 again, to get an
outside line.
Trunk Line Park/Select
Trunk Line Park/Select
A connected external line can be Parked
Parked by a terminal for later retrieval
at the same terminal or any other. When more than one line is Parked
Parked at
a terminal, the user can select which line to retrieve. A terminal can
retrieve a Parked
Parked line whenever that terminal is free or receiving dial
tone.
See "
"
Buttons A-E" on page 20
for setting up function key for Park
Park
(Hold).
(Hold).
To Park an external line
To Park an external line::
1. Press Park (Hold)
Park (Hold) (normally button D
D).
2. Replace handset.
You may Park
Park as many lines as you are connected to on one terminal.
To Retrieve a Parked line
To Retrieve a Parked line::
1. Press Park (Hold)
Park (Hold).
2. Lift handset (unless FT3/4) to speak to caller.
If you have Parked several lines, in order to select a particular line
f you have Parked several lines, in order to select a particular line
from Trunk Park
from Trunk Park::
1. Press Monitor
Monitor repeatedly until you have the desired line number
displayed.
2. Press Park (Hold)
Park (Hold) to retrieve call.
3. Lift handset (unless FT3/4) to speak to caller.
If a line is Parked
Parked for longer than a preset time (refer to System Manager
for details), the line will automatically call you. When you have Parked
Parked a
trunk and the terminal is idle, the display shows
LXX TRUNK PARKED
LXX TRUNK PARKED
,
if you use your terminal for another call the
TRUNK PARKED
TRUNK PARKED
symbol
flashes.
