33
5.
INBUILT INTO ISLAND WALL
STEP 13: FRONT: FINAL LAYER
Place a layer of 12mm thick heat resistant material on the
exterior and finish.
**IMPORTANT**
Do not use Gyprock Fyrchek on the fireplace cavity
STEP 15: BAFFLE PLATE
The baffle plate is a rectangular element with two resting
points at the back.
Lift the baffle plate vertically in to the combustion chamber,
then lower the baffle plate horizontally until the resting points
is placed in to the supports at the back of the combustion
chamber. The two supports in the chamber should tilt the baffle
STEP 14: HEARTH (FLOOR PROTECTOR)
The hearth must be constructed from masonry or a non
combustible material, and must extend a minimum 500mm in
front of the appliance, 250mm on either side of the appliance
and a thickness of 75mm.
