SCS PTC-IIex, Руководство пользователя

Страница: 151 / 220

10 Hostmode
U
1 Here is the PTC-IIex – The PTC-IIex switches on the connect text and the text will be
“Here is the PTC-IIex ”.
U
1 – asks for the connect text
U
0 – switches off the connect text
If
U
is set to 2, the sequences
//B
<CR> and
//Q
<CR> are accepted additionally. The
two sequences are recognized if they occur at the beginning of a line and are closed
directly with <CR> or <Return>.
//B
initiates the sysop-bell (duration about 14 seconds). After receiving
//Q
the PTC
initiates a disconnect.
The sysop-bell is set using the
BEll
command of the
cmd:-
menu (refer to chapter 6.11 ,
page 42 )
10.4.18 V
Gives a longer version string.
10.4.19 W
Default setting: 100
Parameter: X 1... 30,000, slot time in milliseconds.
Defines the slot time for the transmitter control.
The PTC-IIex can transmit at particular times only.
W
(Slottime) defines the period
between these times.
10.4.20 Y
Default setting: 4
Parameter: X 0... 31, number of users.
Limits the number of channels available for remote users.
Y
5 limits the number of connects from outside to five, so if the PTC is presently
connected to by 5 stations, and a further station attempts to connect, this connect request
will be refused.
The
Y
command allows any incoming PR-connect to be transferred to the PTC-IIex PR-
mailbox, but only if
Y
has to be set to 0. This will allow for example, that on exiting the
terminal program, (e.g. automatic de-initialization with
Y
0 in GP ) the PTC-IIex can be
brought to a condition where a connect using the normal MYCALL (i.e. without the -8)
will be transferred to the mailbox. This is useful, as many potential users would use the
normal MYCALL to connect to the PTC-IIex. If the terminal is off-line , and the
configuration is correct, (
Y
0) then all calls, irrespective of if they are the normal
MYCALL , the MYALIAS , or the BBS-MYCALL , will be transferred to the PTC-mailbox.
The
Y
-command has no effect on self initiated connects, the number of channels is not
limited for the user. It is thus possible, with
Y
= 0 to initiate up to 31 PR-connects in
parallel!
137