manualshive.com logo in svg

SCS PTC-IIex, Руководство пользователя


Поделиться
Скачать
background image

6 Commands 

 

This command may be used at any time and causes an uncontrolled disconnect while 
connected! The parameters entered and the PTC mailbox, as well as the log, are not 
deleted. 

6.83

 

RESTart 

Causes a complete re-initialization of the PTC to factory defaults 

This command may be used at any time and causes an uncontrolled disconnect while 
connected! Customized parameters are replaced by the defaults from the ROM, and the 
mailbox messages, as well as the log, are erased. 

6.84

 

RLe 

Default setting: 1 

 

 

 

Parameter:  0  Run length coding off. 
 

 

1  Run length coding on. 

RLe

 allows the automatic run length coding for PACTOR-II links to be switched off (0), 

or to be reactivated (1). This command is usually only used for testing purposes (speed 
comparisons etc). and is only implemented for completeness. 

6.85

 

Send     

Remote

 

The 

Send

 command operates exactly the same as the 

Write

 command for remote 

operation (for compatibility with other mailbox systems). 

The 

Send

 command, whilst connected, allows the sysop to send a file to the other 

station. All additional information concerning the file (File header, EOF text, path text) is 
suppressed, so that, for example, station descriptions and other fix texts may be received 
as per the original on the screen of the other station. 

Send

, in the disconnected condition, is identical to the 

Read

 command. Again here, all 

extra information (file header, EOF text, path text) is suppressed. 

6.86

 

SERBaud 

Default setting: auto 

 

 

 

Parameter:  baudrate 

The serial interface of the PTC-IIex is pre-set to the given baud rate.

 

auto 

Automatic baud rate recognition. 

Sometimes it is recommended to avoid the automatically baud rate recognition of the 
PTC-IIex. This is for example the case if the PTC-IIex (and the whole station) is switched 
on and off by a timer. Also if you want to make the PTC-IIex react on a hostmode 
program after switching on you have to set the baudrate to a fixed value.  

The 

SERBaud

 command allows the PTC-IIex to be set to a certain baud rate and to avoid 

the automatic baud rate recognition after switching on the PTC-IIex. The PTC-IIex 
doesn’t wait for a <Return>, but will start directly! 

72 

Содержание PTC-IIex





























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PTC-IIex

3Com OfficeConnect Getting Started Manual preview
OfficeConnect
Бренд: 3Com Страницы: 24
Ebyte ECAN-W01S User Manual preview
ECAN-W01S
Бренд: Ebyte Страницы: 22
Raveon RV-M3-M Manual preview
RV-M3-M
Бренд: Raveon Страницы: 32
Zte AX320 User Manual preview
AX320
Бренд: Zte Страницы: 22
OptConnect COMPLETE Quick Connect Manual preview
COMPLETE
Бренд: OptConnect Страницы: 17
OptConnect OC-3251 Manual preview
OC-3251
Бренд: OptConnect Страницы: 24
DXO Telecom XV1000 User Manual preview
XV1000
Бренд: DXO Telecom Страницы: 14
NETGEAR DGND3800B Installation Manual preview
DGND3800B
Бренд: NETGEAR Страницы: 2
NETGEAR CBR40 User Manual preview
CBR40
Бренд: NETGEAR Страницы: 101
Javad HPT404BT JL User Manual preview
HPT404BT JL
Бренд: Javad Страницы: 22
ICP DAS USA WLS-R01 Quick Start Manual preview
WLS-R01
Бренд: ICP DAS USA Страницы: 6
Paradyne Hotwire 7974 User Manual preview
Hotwire 7974
Бренд: Paradyne Страницы: 165
Motorola M-Series Owner'S Manual preview
M-Series
Бренд: Motorola Страницы: 24
Ebyte E870-W1 User Manual preview
E870-W1
Бренд: Ebyte Страницы: 30
Omega OMEGABUS A2400 User Manual preview
OMEGABUS A2400
Бренд: Omega Страницы: 68
Patton electronics 1110ARC User Manual preview
1110ARC
Бренд: Patton electronics Страницы: 16
Comet LP040 Instruction Manual preview
LP040
Бренд: Comet Страницы: 39
Motorola MG8725 Quick Start Manual preview
MG8725
Бренд: Motorola Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды