SCS PTC-IIex, Руководство пользователя

Страница: 154 / 220

10 Hostmode
10.4.26 @T3
Default setting: 300,000
Parameter: X 0... 3,000,000, time in milliseconds.
The
@T3
command sets the T3 or link activity timer. If nothing is received from the
distant station for the time T3, then the link status is polled.
10.4.27 %B
Default setting: 1200
Parameter: X Baudrate for the radio link.
Setting / checking the radio link baud rate.
Without a parameter, the
%B
command shows the modem type, and the baud rate set.
If a valid baud rate is given as a parameter, then the DSP is programmed with this
baudrate. Valid baudrates are: R300, R600, 300, 1200, 9600, 19200.
With 300 baud the tuning display is activated (refer to 9.4 on page 115 ).
For 9600 and 19200 baud operation a suitable transceiver is necessary.
10.4.28 %C
This is identical to the
CLR
command in the main menu of the terminal-mode. It works
only on the PACTOR-channel.
10.4.29 %E
Default setting: 6
Parameter: X 1... 7, brightness value.
Identical to the
BRightn
command of the main menu in the terminal mode. This serves
to set the brightness of the LED display between 6% and 100%. The parameter 1 is
equivalent to 6% of the maximum brightness. Parameter 7 represents 100%.
10.4.30 %I
Initiates a BREAKIN. Works only in the receiving condition ( IRS ) (SEND bit in the
status byte = 0).
10.4.31 %L
Default setting: 1
Parameter: 0 PACTOR listen mode switched off.
1 PACTOR listen mode switched on.
Turns PACTOR listen mode on (1) or off (0).
140