SCS PTC-IIex, Руководство пользователя

Страница: 36 / 220

5 PTC-Firmware
condition at program start. The same can be done for de-initialization at program
shutdown.
•
The
PR
command will be ignored with an existing PACTOR connect.
•
The
PT
command is ignored with an existing Packet-Radio connect.
5.6 Remote commands
Some PTC commands are also available for the distant station via the HF link. There are
two control possibilities.
1. First Setting:
REMOTE
1 and
BOX
0. With this setting, all remote control commands
via the radio link must begin with a // sequence, and end with a CHANGEOVER.
(e.g.
//Date
<Ctrl> + <Y> or
//Dir
<Ctrl> + <Y>).
2. Second Setting:
BOX
1, the BOX mode. With this setting, all remote control
commands may be directly entered via the radio link, and terminated with a <Return>.
(e.g.
LOG
<Return> or
Show
<Return>)
The commands for the PTC mailbox and for the gateway mode also belong to the remote
commands.
Here is a list of all remote control commands:
Command Short description Reference
BEll Call the Sysop. Chapter 6.11
Check Lists actual mails Chapter 6.17
CLr
Erase the transmit buffer. Chapter 6.20
DAte
Calls up the PTC date. Chapter 6.33
DELete
Erase a file or files. Chapter 6.35
DIR
Read the main directory. Chapter 6.36
Help Help !! Chapter 6.44
LIst Gives a list of files within a subdirectory. Chapter 6.48
LOg
Calls up the PTC log book. Chapter 6.51
LOGIn
Log in for AMTOR. Chapter 6.52
Phase
Calls up phase information. Chapter 6.71
POSition Requests GPS position Chapter 6.72
Qrt Starts QRT. Chapter 6.77
Read
Reads a particular file. Chapter 6.79
RESEt
Resets the PTC (without loss of MBX data). Chapter 6.82
Send
Sends a particular file. Chapter 6.106
SHow
Calls up QSO statistical data and PTC settings. Chapter 6.88
TIme Calls up the PTC clock time. Chapter 6.94
USer Shows the current users. Chapter 6.102
Version
Calls up the PTC software version. Chapter 6.105
Write
Writes a file into the PTC Mailbox. Chapter 6.106
Table 5.2: Remote commands
In addition, all remote control commands are identified with the word
Remote
in the table of
contens and command description in this manual. (refer also to chapter 6.81 , page 71 ).
22