EN
::: 30
2.2.3 SiM card installation
SiM card installation is simple. Firstly remove the cover of SiM card slot at the back of the alarm panel and then place
the card according to direction indicated. Make sure the cover of SIM card slot is fixed suitably.
Function
indications
description
Built-in speaker
short “beep” once
Confirming key signal received
“beep”, “beep” two short
tones
Exit configuration or learnt succeed
“beep”, “beep”, “beep”
three short tones
error indication
Voice prompt
the function and status of the prompt voice
power
led
light up and “ac adaptor”
icon display on lcd
panel power is normal
light up and “battery” icon
display on lcd
alarm panel external power disconnect, using battery
is off
alarm panel without power supply
arM
led
Light up and “STAY ARM”
icon display on lcd
Alarm panel at STAY ARM state
long light up and “ arM”
icon display on lcd
alarm panel at all arM state
Flashing
Is changing to the DELAY ARM
is off
alarm panel at diSarM
alarM led
light
Alarming, LCD display specific information
Flashing
Is changing to the DELAY A
LA
rM
Status led
light
Panel at the configuration mode
Flashing
panel at the enquiry mode
display on lcd
the gSM Signal,
SiM card Status
and external
telephone line
“ GSM Signal “flashing
Searching gSM Signal
“ gSM Signal “ light
gSM good signal
“ SiM card “ not light
indicates that no plug SiM card
“ SiM card “ light
SiM card loaded correctly
“
P
hone line” not light
no connected the external telephone line
“
P
hone line” light
external phone line connected properly
3.1 Alarm Panel Initial Setup
Load the SIM Card, connect telephone line, fix the GSM Antenna, connect the power and other cables if any,
then power up alarm panel. the alarm panel voice prompt “Welcome to use alarm system”, and start self-test the
GSM network, LCD shows “GSM signal” flashing while searching GSM Signal (it takes about 10 seconds or so for
searching). “gSM signal” light means gSM signals and SiM card are normal. lcd show “phone line” indicates the
external telephone line connection is good.
upon everything working properly, the battery switch should be at the [on] position for continuous charging.
Содержание SCS1 COMFORT+
Страница 1: ...V 03 2015 Ind A S E N T I N E L KIT CENTRALE ALARME SCS1 COMFORT FR ...
Страница 25: ...V 03 2015 Ind A S E N T I N E L CENTRAL ALARM KIT SCS1 COMFORT EN ...
Страница 47: ...EN 47 ...