European Safety Systems Ltd.
Impress House, Mansell Road, Acton, London W3 7QH
www.e2s.com
Tel: +44 (0)208 743 8880
Document No. D209-00-511-IS
Issue 1
20-08-22
Sheet 1 of 7
INSTRUCTION MANUAL
E2xC1LD2R & E2xC1LD2F Combined Sounder & Beacon
For use in Hazardous Locations
E2XC1LD2F
E2XC1LD2R
1) Product Table
Ensure the system power supply is capable of providing the maximum current required for all units. Review associated cable
size, length and quantity of units on each circuit.
2) Warnings
DO NOT OPEN WHEN AN EXPLOSIVE
ATMOSPHERE IS PRESENT
DO NOT OPEN WHEN ENERGISED
POTENTIAL ELECTROSTATIC CHARGING
HAZARD - CLEAN ONLY WITH A DAMP
CLOTH
HIGH VOLTAGE SHOCK HAZARD. WAIT 5
MINUTES AFTER REMOVING POWER
BEFORE OPENING THE ENCLOSURE
Avertissement:
NE PAS OUVRIR UN PRESENCE
D’ATMOSPHERE EXPLOSIVE
NE PAS OUVRIR ENERGIE
DANGER POTENTIEL CHARGE
ÉLECTROSTATIQUE - NETTOYER
UNIQUEMENT AVEC UN CHIFFON HUMIDE
HAUT TENSION, RISK DE CHOC.
ATTENDEZ 5 MINUTES APRES AVOIR
DEBRANCHE L’ALIMENTATION AVANT
D’OUVRIR LA BOITIER
3) Rating & Marking Information
3.1. ATEX / IECEx / UKEx certification
The E2xC1LD2 combined alarm horn and LED beacon
complies with the following standards:
Standards
EN IEC 60079-0:2018 / IEC60079-0:2017 (Ed 7):
Explosive Atmospheres - Equipment. General Requirements
EN IEC 60079-7:2015 +A1:2018 / IEC 60079-7:2018 (Ed. 5.1):
Explosive Atmospheres - Equipment Protection by Increased
Safety "e"
EN 60079-31:2014 / IEC 60079-31:2013 (Ed 2):
Explosive Atmospheres - Equipment Dust Ignition Protection
by Enclosure "t"
Ratings
E2XC1LD2 :
Ex ec IIC Gc T3 Ta -20°C to +55°C
Ex tc IIIC Dc T105°C Ta -20°C to +55°C
Ex tc IIIC Dc T90°C Ta -20°C to +40C
Certificate No.
DEMKO 06ATEX 0421554X
IECEx ULD 14.0012X
UL21UKEX2135X
ATEX Mark, Equipment
Group and Category:
II 3G
II 3D
CE Marking
UKCA Marking
Model
Nom.
Voltage
Voltage Range
Sounder
Current
Beacon
Current
E2xC1LD2FDC024
E2xC1LD2RDC024
24Vdc
18-30Vdc
284mA
346mA
E2xC1LD2FDC048
E2xC1LD2RDC048
48Vdc
42-54Vdc
146mA
115mA
E2xC1LD2FAC115
E2xC1LD2RAC115
115-120Vac
50/60Hz
N/- 10%
104mA
102.4mA
E2xC1LD2FAC230
E2xC1LD2RAC230
220-230Vac
50/60Hz
N/- 10%
54mA
49.4mA
The current levels shown above are for the tone resulting in max. current draw (tone 1 - 340Hz Continuous)
Table 1: Electrical Ratings.
