18
FR
D4- Essais et vérification
D4- Indications voyants LED
Veuillez soigneusement réaliser les vérifications ci-dessous :
• Débloquez le motoréducteur avec la clé de déverrouillage.
• Assurez-vous que le portail puisse être déplacé manuellement pendant les phases d’ouverture et de fermeture
avec une force max 390N (40 kg environ).
• Verrouillez le motoréducteur.
• Utilisez le sélecteur à clé, appuyez sur le bouton ou utilisez l’émetteur, testez l’ouverture, la fermeture et l’arrêt
du portail puis assurez-vous que le portail soit dans la bonne direction.
• Vérifiez les appareils un par un (photocellules, feu clignotant, etc.) pour confirmer que l’unité de commande
reconnaît chaque appareil.
LED
Description
LED 1
La LED1 s’allume, lorsqu’il y a un obstacle entre les photocellules ou un défaut d’alignement
ou un défaut de branchement (attention, fonction H doit être activée avec une photocellule
connectée sur PH1).
LED 2
La LED2 s’allume, lorsqu’il y a un obstacle entre les photocellules ou un défaut d’alignement
ou un défaut de branchement (attention, fonction J doit être activée avec une photocellule
connectée sur PH2).
E- CARACTÉRISTIQUES TECHNIQUES
Moteur
moteur 24V DC
Type
coulissant
Régime moteur
2600 tours/min
Poids max du portail/ Largeur max du portail
500 kg / 5 m
Courant de fonctionnement maximum
5.5A pour 10 secondes max.
Température de fonctionnement
-20°C~+50°C
Vitesse
23.10 cm/s
Dimensions
309 mm x 157 mm x 308 mm
Moteur
Canaux
4
Fréquence / Puissance max d’émission
433.92 MHz / < 10mW
Alimentation
2 piles lithium CR2016 fournies
Sécurité
code secret tournant
Télécommandes
Содержание MCO0058
Страница 2: ......
Страница 10: ...10 FR a b d C5 Installation et raccordement Branchement de l alimentation 230 volts...
Страница 29: ...29 EN a b d C5 Installing 230V connection switch power supply...
Страница 40: ...Route de St Symphorien 85130 Les Landes G nusson Toutes les infos sur www scs sentinel com...