Scientific SM6016, Руководство пользователя

Страница: 24 / 44

24 SM6016
in utility menu to default settings. These default settings are as below:
Table 4 Instrument Default Settings
Settings Default Configuration
Primary Function C (capacitance)
Secondary Function None (frequency)
Auto LCR function Off
Equivalent Method SER (series)
Measurement Frequency 1kHz
Measurement Level 0.6V
Measurement Speed Slow (SLOW)
Tolerance Mode Off
Beep Sound On
Auto Power-off Timing 5 minutes
Stored Measurement Setup clear
Stored Utility MenuOption clear
In “dEF” option, push either
▲
and
▼
button to choose “ NO ” or “yES ”. “NO ”
means the instrument will not be set back to default. “yES” indicates to reset all
settings to default and to clear previously stored setup.
Default Setting: No
NOTE: Exiting mode also decides whether or not to perform “yES” function. At the
use of “exiting without saving”, “yES” is ineffective; when “saving and exiting” is
selected, restore operation will be efficient.
NOTE: In the case where under “PuP ” option, “SEt” is selected and “dEF” is set to
“yES”, the “PuP” setting has priority over the “dEF” setting. This means the
instrument will not be set back to default upon saving and exiting the utility menu.
Instead, the power-up settings will be stored and will be recalled upon the next
power-up of the instrument.
Indicate battery voltage(bAtt)
When menu option changes to “ bAtt ” , the secondary display will indicate battery
voltage that is for reference instead of for operational function.
Exit Utility Menu
There are two methods for exiting the utility menu:
Saving and Exiting , Exiting
without Saving . The former saves all the changed settings before exiting, and the
latter exits the menu without saving any changes.
Saving and Exiting
To save all utility menu option settings and to exit the menu, press and hold down the
UTIL button for a long time. After this, the meter will exit the menu. Then PuP and