SM6016
17
6.
Operation Instruction
6.1 Data hold mode (HOLD)
The data hold function allows the user to freeze the display data. The data displayed
on LCD will not be updated upon the phase of test.
Turn On Data Hold
To use data hold, press the HOLD button. The “DH” indicator will display on the
screen when data hold is active. At this moment, primary and secondary displayed
on LCD is the testing result before the press of HOLD button.
Turn Off Data Hold
To disable the data hold, press the HOLD button again. The “DH” indicator will
disappear on the screen, and meter will remain in normal operation mode.
6.2 Data Record Mode (REC)
If the data stability of tested components is poor and the data fluctuates in a range,
data record mode can aid the reading of data.
This mode is used for dynamically recording maximum, minimum, and average
values in a range.
Enable Static Recording
Press and hold down the REC button for a long time to enter the data recording
mode. The display should indicate “MAX AVG MIN” simultaneously, which indicates
the meter is in static recording mode.
Using Static Recording
There are four different modes that can be selected in static recording. Per press of
the REC button (in recording mode, FREQ will disable), the modes will change and
repeat in the following order:
Recording mode
Maximum Mode
Minimum Mode
Average
Mode
Recording State
This is the default mode when enabling static recording. In this mode, LCD will
display “MAX AVG MIN” indicator. In a relatively stable range of test data, a beep
tone will sound once a recording has been stored.
NOTE:
When the data fluctuation range is upwards of
1%, data record will
dynamically be refreshed.
Maximum Display
Press REC button until the “ MAX ” indicator is shown on display. This indicates that
the value in the primary display represents the recorded maximum value.
Содержание SM6016
Страница 1: ...Hand Held LCR Meter SM6016 User Manual ...
